RESTORE LIKE-NEW GLOSS BY HAND

PhoenixCoat Wearable Heated Blanket

PhoenixCoat Wearable Heated Blanket

Bring faded, dead paint back to life in 30 minutes. Just wipe it on by hand. No body shop, no respray bill.

No results? Full refund within 30 days.
$54.99 USD $109.99 USD SAVE 50%

Colour and gloss return in under 30 minutes. Lasts 2+ years. No tools, no machines, no experience needed.

Works on fiberglass too, tested on a sun-faded RV.

  • American express payment method American Express
  • Apple pay payment method Apple Pay
  • Diners club payment method Diners Club
  • Discover payment method Discover
  • Google pay payment method Google Pay
  • Master payment method Mastercard
  • Paypal payment method PayPal
  • Shopify pay payment method Shop Pay
  • Visa payment method Visa

30-Day Money-Back Guarantee

Real Results, Real Vehicles

Free Tracked Shipping

Denvale heated robe in Pink, laid flat with the detachable controller

PhoenixCoat Wearable Heated Blanket

Regular price $59.95
Regular price $59.95 Sale price
SAVE Liquid error (snippets/price line 119): Computation results in '-Infinity'% Sold out

Processing time: 1 to 3 business days to prepare and dispatch your order.

Delivery time: 5 to 8 business days after dispatch, with tracking sent by email.

Free tracked shipping on every order, no minimum spend.

Alaska & Hawaii: a flat $20 shipping fee applies, with delivery in 10 to 13 business days after dispatch.

PhoenixCoat™ is formulated to make the faded clear coat on older vehicles look 80 to 90% better. For the best possible finish, follow these guidelines:

• Use on vehicle exteriors only
• Panel temperature between 50 and 90°F
• Humidity below 90%
• Work in a well-ventilated space
• Wear gloves, a mask and other protective gear (PPE)
• Keep the vehicle dry for 24 hours after application
• Test on a small panel before treating the whole vehicle

STEP 1. PREP & WASH
A flawless finish starts with good prep. Wash the treatment area with water and/or a detailing spray. If your clear coat is peeling or flaking, gently wet-sand the peeling edges with fine sandpaper until they are level and smooth, so the surface is even before you apply. Sand lightly in one direction and don't go too deep. Rinse off all the sanding dust and let the surface dry completely. The area must be fully dry before you start. Test on a small section of one panel before moving on to the rest of the vehicle.

STEP 2. APPLICATION
With the cap on, shake the bottle well, then remove the seal under the cap. Pour the serum onto a folded shop towel or micro applicator. Use enough product to keep a wet edge across the entire panel. Keep the bottle within reach: if the towel starts to dry out mid-panel, add a little more PhoenixCoat™ so it stays wet.

Start at a top corner so any excess serum can run down the panel. Keep your hand flat on the towel and, with light pressure, sweep from one edge of the panel to the other. Work back and forth, slightly overlapping each line, and spread the product evenly. Missed a spot within the first 2 to 3 minutes? Run one full, gentle pass back over it. Cover every spot, but don't work any area more than needed. You have a 2 to 3 minute working window. Once it has passed, DO NOT go back over that area.

Important: if you make a major mistake and need to remove the coating, it comes off far more easily within 15 minutes of applying it. During those 15 minutes, scrub the area with Wax and Grease Remover. Once the coating has cured, removing it requires wet sanding / a heavy cut with a rotary, or plenty of elbow grease with a strong solvent. This coating is built to last.

STEP 3. CURING & AFTER-CARE
Allow 24 hours for the coating to cure. Do NOT touch the area or let it get wet for at least 24 hours after application. Once cured, you are left with a long-lasting coating. The more product you apply, the longer it takes to cure. Hand washing is fine from 48 hours after application. We recommend you DO NOT use an automatic car wash afterwards: auto washes are known to scratch regular clear coat, and they can do the same to this coating.

TROUBLESHOOTING
Streaks: Usually caused by too many overlapping passes in direct sunlight, or by applying in random, uneven motions. Work in straight lines, avoid going over the same area twice, and keep a wet edge on your towel.
Rainbow Effect or Low Spots: Most often caused by NOT USING ENOUGH PRODUCT. Make sure your towel is well loaded. Heavy or uneven pressure can also cause it, so keep your pressure light and even across the whole panel.
Fish Eyes / Solvent Pops: Keep the area dry, wait the full 24 hours, and let the first coat cure for 24 hours before adding another layer.
Dirt Specks: Specks of dirt in the finish mean the surface wasn't clean enough. Prep is EVERYTHING, so wash thoroughly before you start.

Try it on your own car, in your own driveway, and see the difference for yourself. If your paint doesn't visibly come back to life within 30 days, you get every cent back. No return shipping, no questions asked, no hassle. And real people are here for you 24/7, before and after you order.

Questions, or need a hand with anything? Email us anytime at support@tryphoenixcoat.com. We reply fast.

View full details
The 10-Second Water Check

Pour a little water on your paint.
If the shine comes back wet, it can come back for good.

For a few seconds, water fills the tiny cracks in your worn clear coat and shows you the colour that's still there underneath. PhoenixCoat™ captures that same wet-look shine and keeps it there for years.

1 · DULL & CHALKY
Dull & Chalky
2 · SHINES WHEN WET
Shines When Wet
3 · RESTORED TO LAST
Restored to Last
OUR RESULTS

Results from real customers. From faded to factory gloss.
No body shop required.

Before and after 1
Before and after 2
Before and after 3
Before and after 4
Before and after 5
Before and after 6
Before and after 7
Before and after 8
Before and after 9
Before and after 10
1 / 10
THE SCIENCE BEHIND IT

What really happens to your paint?

Your clear coat is a thin, transparent shield over your colour. Years of UV, heat and oxidation etch it with millions of microscopic pits. Light hits those pits and scatters instead of reflecting back to your eye. That scatter is the chalky, faded look you see.

01

Fills the damage at a microscopic level

Active resins flow deep into the pits and cracks oxidation left behind, levelling the surface from within.

02

Brings back true optical clarity

With the surface smooth again, light reflects straight back. That deep, wet-look gloss returns, and this time it stays.

03

Locks in a UV-resistant shield

In 24 hours it cures into a hard protective layer that guards your paint against sun and weather for 2+ years on average.

WHAT YOU CAN EXPECT

Restored clarity, depth and gloss, for years

30 min

to see the colour come back

2+ yrs

of lasting protection, rain or shine

0

tools, machines or experience required

Paint
Trim · Lights

one bottle, every faded surface

EASY DIY APPLICATION

Three steps. One afternoon. Like-new paint.

1

Prep a clean surface

Wash the faded area and let it dry fully. Strip off any old wax or sealant so the serum bonds straight to the paint.

2

Wipe it on

Add a little serum to a microfiber cloth or applicator pad and spread it in even, overlapping strokes. No machines, no skill needed.

3

See the colour come back

Depth and shine return right in front of you.

What you see while it's wet is what you keep once it cures.

HONEST FIT CHECK

Who this is, and isn't, for

PhoenixCoat™ is built for faded, oxidised and swirled clear coat where the paint surface is still intact but has lost its clarity. It also revives dull trim and yellowed headlights, and helps mitigate the look of early clear coat peel.

Many drivers use it before committing to a full respray, and never end up needing one.

✓

Perfect for

  • ✓ Faded, oxidised or sun-damaged paint with intact clear coat
  • ✓ Sun-faded fiberglass, including RVs
  • ✓ Swirl marks and spider-web scratches killing your gloss
  • ✓ Dull trim and yellowed headlights
  • ✓ Making a car look sharp before selling it
✕

Not intended for

  • ✕ Deep scratches through to the base coat or metal
  • ✕ Panels where the clear coat is completely gone
  • ✕ Rust, dents or structural damage
READ THIS BEFORE THE BODY SHOP

Why pay thousands for paint you already have?

Most people assume a full respray is the only fix for faded paint. That's exactly why body shops quote $3,000 USD to $8,000USD without hesitation.

In reality, most faded panels don't need new paint. They need proper surface revival. PhoenixCoat™ brings back clarity, depth and gloss in minutes, for a fraction of the cost. No sanding, no repainting, no weeks off the road.

PHOENIXCOAT™ FULL RESPRAY
Cost from $54.99 USD $3,000 USD to $8,000 USD
Time without your car 0 days 1 to 3 weeks
Skill required None, just wipe on by hand Professional only
Original factory paint Preserved Sanded off
Durability 2+ years Long-term
GOT SWIRLS?

Kill the spider webs, bring back the depth

Swirl marks and faded clear coat make your paint look tired even if the rest of the car is mint. Those fine spider-web scratches catch the light and flatten the depth your colour is supposed to have.

PhoenixCoat™ restores clarity and gloss instead of just covering it up. Colour depth and shine come back in minutes, without machines or expensive detailing work.

If your paint looks dull in direct sun, this is the fix.

2,068+ REVIVED VEHICLES

Faded paint happens to everyone. Fixing it doesn't have to cost a fortune.

Years of sun and weather dull every clear coat eventually. These drivers faced the same problem and brought their paint back by hand, at home.

Customer vehicle 1
Customer vehicle 2
Customer vehicle 3
Customer vehicle 4
Customer vehicle 5
Customer vehicle 6
Customer vehicle 7
Customer vehicle 8
Customer vehicle 9
WHAT DRIVERS SAY

Rated 4.8 by people who almost paid for a respray

★★★★★

"The sun had baked my 2009 truck's hood completely chalky. A body shop quoted me $4,200 for a respray. Used one bottle of this and it genuinely looks factory fresh again. Took me 25 minutes."

MT

Mark T. ✓ Verified buyer

Revival Kit · 2 bottles

★★★★★

"Honestly thought the before-and-afters were fake. Tried the water test first, saw the shine come right back, and pulled the trigger. Six months later, it’s still glossy after a brutal summer."

SL

Sarah L. ✓ Verified buyer

Starter Kit · 1 bottle

★★★★☆

"Used the 3-bottle kit on my whole car before trading it in. The dealer bumped their initial offer up by $1,100. Best return on investment I've ever gotten in a single afternoon."

DP

Daniel P. ✓ Verified buyer

Full Rebirth Kit · 3 bottles

30 DAY GUARANTEE

See the shine come back, or get every cent back.

Try it on your own car, at home, on your schedule. If you don't see a real difference within 30 days, we refund you in full. No return shipping, no hoops, no hard feelings.

Before you order

Everything drivers ask us

Do the 10-second water check. If your paint looks noticeably better wet, the answer is yes: your clear coat is faded but still intact, and that's exactly what PhoenixCoat™ is made to restore. It works on every paint colour and every type of vehicle.

Yes. It has been tested on a sun-faded fiberglass RV and brought the gloss back, applied by hand just like on paint. Run the water check first: if the surface looks better wet, it can be restored. Large surfaces like an RV take several bottles, as one 100ml bottle covers roughly one car hood.

Not at all. If you can wipe down a table, you can do this. Clean the panel, add a little serum to a microfiber cloth or applicator pad, spread it evenly and let it cure.

On average 2+ years, depending on how much sun the vehicle gets and how it's looked after. It cures into a hard protective layer, unlike wax that rinses away.

Repainting covers your car in new paint; PhoenixCoat™ restores the paint that's already there. On faded clear coat that's still intact, the look is comparable, for about 2% of the price and with zero time off the road.

Almost right away. Just keep the treated panel dry and don't wash it for the first 24 hours while it cures.

Your paint is safe. No machines or abrasives are involved, so nothing can burn through or leave swirls. The worst an uneven coat can do is look patchy, and a second light wipe fixes it.

Every bottle holds 100ml, enough for a hood, a roof or about two door panels when applied in a thin, even coat.

ONE AFTERNOON. TWO YEARS OF GLOSS.

Faded isn't finished. Bring your paint back to life.

Try the 10-second water check now. If the shine shows up wet, PhoenixCoat™ can make it last for years. Guaranteed, or every cent back.